Electric Horse Fence – Equipment Checklist

Electric fences have one of two functions: keeping pets indoors or keeping out predators. Electric fences are very effective tools for both of these tasks and a popular choice for containing horses.

Electric grids are the easiest and most flexible way to create an electric fence. This is great for creating temporary stakes or fence lines that you’ll want to move frequently.

However, mosquito nets are best for small animals such as poultry, rabbits, sheep and goats. Multiple wires are a reasonable alternative for goats and sheep. Electrical tape is ideal for horses thanks to its good visibility. For large, durable fences and those for pigs and cattle, durable galvanized wire is the best choice.

Tape or wire for temporary fences can be supported with plastic posts. Tape, multi wire and galvanized wire can all be attached to wood or metal posts for permanent fencing.

Every other connection must be supported by an insulator to support the wire. There is a wide range of different types available.

Your fence is powered by an energized electric fence that either runs on a battery or is connected directly to household electricity. The right fence activator for your particular application depends on the power source used and the overall length of your fence.

The general setup process is relatively straightforward. Plant your posts and install your wires. Install a fence activator – either near its power point or, if battery-powered, near the fence. Ground the fence with power by placing a ground stud near it.

The green clamp of the activator must be connected to the ground spike; The red clip is attached to the fence wire. Once you turn on the fence activator, your fence is on!

Electric Fencing Equipment Checklist

Electric fences work by sending an electric current through their wires at one pulse per second. When an animal touches the wire, it forms a circle between the fence and the ground. This sends a static, frightening but harmless shock through the animal. The energy released into the ground returns to the fence activator through its ground height.

Note that electric fences do not need to be constructed as closed loops; The cycle that makes it work is closed when an animal touches it. The straight electric fence still works perfectly.

The following components are required for an electric fence:

1) Energizer.

They can be powered by batteries, solar cells, or connected to the home electricity grid. Activating agents are often referred to as “swordsmen”. In addition to the power supply, electric fence hardware must also be matched to the type of fence used and the overall length of your fence. Fence activators should also be appropriate for the type of animals you expect to touch the fence.

2) The material of the fence.

This can be electrical grid, electrical tape, multiple wires, electrical rope or galvanized wire. For multi-threaded fences, you will need connectors to connect the threads. Alternatively, the wire can be woven into an endless loop between the insulators.

3) Share the land.

This may or may not be built into your energy. Your fence won’t work without one.

4) Most types of electrical networks contain built-in poles and stakes .

This eliminates the need for separate posts and insulators.

5) If you are using wooden or metal poles, you will need insulators to hang the fence material.

If you are using plastic stair posts, “wire brackets” may be included.

6) If the fence activator is connected to a household or utility power source, you will need insulated cables and alligator clips to make the necessary connections between the fence activator, the fence and the ground elevation.

7) If you are using a battery activator, you will need a battery suitable for the particular model you are using.

Most fence activators use 12, 9, or 6 volt batteries. With a low voltage fence, you may be able to power your fence activator using standard household D-cell batteries.

Is your fence not working? Money box DIY electric fence troubleshooting for simple solutions.